| Citric Acid IP CS2 5KG | |||
| 92489SR500 | 44831A407KX | ||
| IP Customer specific 2 | 44831A4 | ||
| 77-92-9 | 108032 | ||
| C6H8O7 | November 2024 | ||
| 192.13 | October 2027 | ||
| Sr.No. | Test | Result | Specification | Method Reference |
|---|---|---|---|---|
| 1 | Description | White powder; slightly hygroscopic in moist air. | Colourless crystals or a white powder; slightly hygroscopic in moist air.(Note: The product may cause lumps or hardening over the storage). | IP |
| 2 | Solubility | Complies | Very soluble in water, freely soluble in ethanol (95%), sparingly soluble in ether.. | IP |
| 3 | Identification A (By IR) | Complies | IR spectra of the sample should be concomittant with IR spectra of the satandard. | IP |
| 4 | Identification B (By Chemical test) | Complies | A white precipitate soluble in 6M acetic acid should produce. | IP |
| 5 | Identification C (By Chemical test) | Complies | A 10.0% w/v solution should be strongly acidic. | IP |
| 6 | Appearance of Solution | Complies | The solution should be clear and not more intensely coloured than reference solution YS7, BYS7 or GY7. | IP |
| 7 | Arsenic (As) | Less than 1ppm | 1ppm max. | IP |
| 8 | Barium(Ba) | Complies | Any opalescence produced shall not more intense than that of mixture of 5ml of solution A and 5ml of distilled water. | IP |
| 9 | Calcium (Ca) | Less than 200 ppm | 200ppm max. | IP |
| 10 | Heavy metals | Less than 10 ppm | 10ppm max. | IP |
| 11 | Iron (Fe) | Less than 50 ppm | 50ppm max. | IP |
| 12 | Chlorides | Less than 50 ppm | 50ppm max. | IP |
| 13 | Sulphate (SO4) | Less than 150 ppm | 150ppm max. | IP |
| 14 | Oxalic acid | Complies | Any pink colour produced should not be more intense than that produced by carrying out the test using 0.2mg of oxalic acid dissolved in 4ml of water. | IP |
| 15 | Readily carbonizable substances | Complies | Any colour produced shall not be more intense than that of a mixture of 1.0 ml of CCS and 9.0 ml of FCS. | IP |
| 16 | Sulphated ash | 0.04% | Not more than 0.1%. | IP |
| 17 | Water | 0.04% | Not more than 1.0%. | IP |
| 18 | Assay (Anhydrous basis) | 99.8% | Not less than 99.0% and Not more than 101.0%. | IP |
| 19 | Particle size | 82.8% material passes through #40 mesh | NLT 50% material should pass through #40 mesh. | In-house |
Remarks: THE CAPTIONED MATERIAL COMPLIES WITH THE PRESCRIBED QUALITY OF IP SPECIFICATION.
Actylis provides this analytical report in good faith and to the best of its knowledge. It should not be substituted for the users own raw material quality control.
| Tested By (Chemist - Quality Control) | Approved By (Head - Quality Control) |
Computer Generated Report - Does not require Signature.
