| Citric acid monohydrate IP 5KG | |||
| 50490SR500 | 453710625AY | ||
| IP | 4537106 | ||
| 5949-29-1 | 112488 | ||
| C6H8O7.H2O | January 2025 | ||
| 210.14 | December 2027 | ||
| Sr.No. | Test | Result | Specification | Method Reference |
|---|---|---|---|---|
| 1 | Description | Colourless crystals; slightly efflorescent in warm, dry air. | Colourless crystals or a white, crystalline powder; slightly efflorescent in warm, dry air.(Note: The product may cause lumps or hardening over the storage). | IP |
| 2 | Solubility | Complies | Very soluble in water, freely soluble in ethanol (95%), Sparingly soluble in ether. | IP |
| 3 | Identification A (By IR) | Complies | IR spectra of the sample should be concomitant with IR spectra of the corresponding standadrd | IP |
| 4 | Identification B (By Chemical test) | Complies | It gives reaction A of citrates. | IP |
| 5 | Identification C (By Chemical test) | Complies | A 10.0% w/v solution should be strongly acidic. | IP |
| 6 | Appearance of Solution | Complies | The solution should be clear and colourless or not more intensely coloured than reference solution YS7, BYS7 or GYS7. | IP |
| 7 | Arsenic (As) | Less than 1 ppm | NMT 1ppm | IP |
| 8 | Barium(Ba) | Complies | Any opalescence produced should not be more intense than that of mixture of 5ml of solution A and 5ml of distilled water | IP |
| 9 | Calcium (Ca) | Less than 200 ppm | NMT 200ppm | IP |
| 10 | Heavy metals | Less than 10 ppm | NMT 10ppm | IP |
| 11 | Iron (Fe) | Less than 50 ppm | NMT 50ppm | IP |
| 12 | Chlorides | Less than 50 ppm | NMT 50ppm | IP |
| 13 | Sulphate (SO4) | Less than 150 ppm | NMT 150ppm | IP |
| 14 | Oxalic acid | Complies | Any pink colour produced should not be more intense than that produced by carrying out the test using 0.2mg of oxalic acid dissolved in 4ml of water | IP |
| 15 | Readily carbonizable substances | Complies | Any colour produced should not be more intense than that of a mixture of 1.0 ml of CCS and 9.0 ml of FCS. | IP |
| 16 | Sulphated ash | 0.05% | NMT 0.1% | IP |
| 17 | Water | 8.35% | 7.5% to 9.0% | IP |
| 18 | Assay (Anhydrous basis) | 99.8% | 99.0% - 101.0% | IP |
Remarks: THE CAPTIONED MATERIAL COMPLIES WITH THE PRESCRIBED QUALITY OF IP SPECIFICATION.
Actylis provides this analytical report in good faith and to the best of its knowledge. It should not be substituted for the users own raw material quality control.
| Tested By (Chemist - Quality Control) | Approved By (Head - Quality Control) |
Computer Generated Report - Does not require Signature.
